Wearable Development Boards

!
Velleman
1-5 Days
VMW100
Weight: kg

Velleman BrightDot wearable Arduino Development Board VMW100

This BrightDot is an ATmega32U4 based, Arduino® compatible development board that you can use as a wearable or e-textile. Be creative and use the multicoloured RGB LEDs to brighten up your wardrobe, decorations, backpack or even make Christmas ornaments! The alligator friendly pads/holes enable you to quickly prototype your creation. The pads were also made bigger to ease the use of conductive wire and they are gold plated to ensure durability. The integrated single cell LiPo charger makes the LED badge more versatile, even though it has an existing open system. The 24 BrightDot LEDs (WS2812) enable you to display bright and colourful animations with just a single pin! This module comes preloaded with a watch program and an onboard hardware real time clock. The real time clock enables you to keep the time, even when the ATMega32u4 is powered off (but the power supply must stay connected). With the onboard single colour LED and button, you can quickly debug and test programs without any wires. To top things off, a dedicated ON/OFF switch is included to keep the power consumption as low as possible when you're not using the device.
Velleman
1-5 Days
VMW101
Weight: kg

Velleman Wearable ESP32 Development Board VMW101

Get ready to meet the most versatile wearable and ESP32 based development board of the moment! It's 100% Arduino compatible and it's easy and invisible to wear thanks to its uniquely thin PCB with 8 x sewable pads. Plus, it won't sting you because the PCB design has no sharp edges. Also, 4 of the pads are capacitive touch-enabled.As for the versatility; this little development board of 56 x 50 x 7.5 mm packs a lot of features such as a hall effect sensor, a temperature sensor and an ultra-low power analog pre-amplifier. But the neatest on-board feature is undoubtedly the ability to connect the board to WiFi and Bluetooth®. Getting any ideas? Here's one: connect the board with our BirghtDot wearable LEDs collection and make them react to text or social messages, magnets, sounds, time, temperature and more!You can easily connect this wearable with a battery thanks to the JST connector and you don't have to worry about high power consumption because the board also features a deep sleep modus to keep its consumption to a minimum when you don't need it. To top things off, this thin board is at least 10 times faster than an Arduino Uno because of its super high 240 MHz clock. Go take a look at the BrightDot wearable LED boards and get creative!
Velleman
5-7 Days
VMW102
Weight: kg

Velleman BrightDot Small Pack, 5 x Singleton LEDs

It's time to get creative with LED's thanks to the BrightDot wearable collection!BrightDots are small and wearable modules with one or more LED's that need to be controlled by an Arduino compatible development board.The entire collection includes a series of diverse modules with addressable RGB LED's that can be controlled individually. We also developed a unique Arduino compatible VMW101: ESP32 Wearable Development Board that you can use to create something bright & wearable that's also smart.This set includes 5 singleton BrightDots. Each PCB is super thin and includes gold plated contacts with 6 sewing holes of 1.22mm. Also, all models have backup lines to ensure that one broken LED does not affect the others.Every LED is controlled by 3 wires (power, ground & data) and can be connected via these wires to the next LED, creating a big string of LED's. You can solder these LED's in electric circuits, or sew them into clothing, onto backpacks, onto shoes etc.
Velleman
5-7 Days
VMW103
Weight: kg

Velleman BrightDot Medium Pack, 2 x Fivefold, 2 x Threefold LEDs

It's time to get creative with LED's thanks to the BrightDot wearable collection!BrightDots are small and wearable modules with one or more LED's that need to be controlled by an Arduino compatible development board.The entire collection includes a series of diverse modules with addressable RGB LED's that can be controlled individually. We also developed a unique Arduino compatible VMW101: ESP32 Wearable Development Board that you can use to create something bright & wearable that's also smart.This set includes 2 threefold BrightDot strips and 2 fivefold BrightDot strips. Each PCB is super thin and includes gold plated contacts with 6 sewing holes of 1.22mm. Also, all models have backup lines to ensure that one broken LED does not affect the others.Every LED is controlled by 3 wires (power, ground & data) and can be connected via these wires to the next LED, creating a big string of LED's. You can solder these LED's in electric circuits, or sew them into clothing, onto backpacks, onto shoes etc.
Velleman
5-7 Days
VMW104
Weight: kg

Velleman BrightDot Large Pack, 2 x Tenfold, LEDs

It's time to get creative with LED's thanks to the BrightDot wearable collection!BrightDots are small and wearable modules with one or more LED's that need to be controlled by an Arduino compatible development board.The entire collection includes a series of diverse modules with addressable RGB LED's that can be controlled individually. We also developed a unique Arduino compatible VMW101: ESP32 Wearable Development Board that you can use to create something bright & wearable that's also smart.This set includes 2 tenfold BrightDot strips. Each PCB is super thin and includes gold plated contacts with 6 sewing holes of 1.22mm. Also, all models have backup lines to ensure that one broken LED does not affect the others.Every LED is controlled by 3 wires (power, ground & data) and can be connected via these wires to the next LED, creating a big string of LED's. You can solder these LED's in electric circuits, or sew them into clothing, onto backpacks, onto shoes etc.
Velleman
5-7 Days
VMW105
Weight: kg

Velleman BrightDot Corner Pack, 2 x L/H, 2 x R/H, LEDs

It's time to get creative with LED's thanks to the BrightDot wearable collection!BrightDots are small and wearable modules with one or more LED's that need to be controlled by an Arduino compatible development board.The entire collection includes a series of diverse modules with addressable RGB LED's that can be controlled individually. We also developed a unique Arduino compatible VMW101: ESP32 Wearable Development Board that you can use to create something bright & wearable that's also smart.This set includes 2 left BrightDot corners and 2 right BrightDot corners. Each PCB is super thin and includes gold plated contacts with 6 sewing holes of 1.22mm. Also, all models have backup lines to ensure that one broken LED does not affect the others.Every LED is controlled by 3 wires (power, ground & data) and can be connected via these wires to the next LED, creating a big string of LED's. You can solder these LED's in electric circuits, or sew them into clothing, onto backpacks, onto shoes etc.
Velleman
5-7 Days
VMW106
Weight: kg

Velleman BrightDot Arc Pack, 2 x L/H, 2 x R/H, LEDs

It's time to get creative with LED's thanks to the BrightDot wearable collection!BrightDots are small and wearable modules with one or more LED's that need to be controlled by an Arduino compatible development board.The entire collection includes a series of diverse modules with addressable RGB LED's that can be controlled individually. We also developed a unique Arduino compatible VMW101: ESP32 Wearable Development Board that you can use to create something bright & wearable that's also smart.This set includes 2 left BrightDot arcs and 2 right BrightDot arcs. Each PCB is super thin and includes gold plated contacts with 6 sewing holes of 1.22mm. Also, all models have backup lines to ensure that one broken LED does not affect the others.Every LED is controlled by 3 wires (power, ground & data) and can be connected via these wires to the next LED, creating a big string of LED's. You can solder these LED's in electric circuits, or sew them into clothing, onto backpacks, onto shoes etc.
Velleman
1-5 Days
VMW107
Weight: kg

Velleman BrightDot Small Circle Pack, (2 pcs)

It's time to get creative with LED's thanks to the BrightDot wearable collection!BrightDots are small and wearable modules with one or more LED's that need to be controlled by an Arduino compatible development board.The entire collection includes a series of diverse modules with addressable RGB LED's that can be controlled individually. We also developed a unique Arduino compatible VMW101: ESP32 Wearable Development Board that you can use to create something bright & wearable that's also smart.This set includes two small Brightdot circles. Each PCB is super thin and includes gold plated contacts with 6 sewing holes of 1.22mm. Also, all models have backup lines to ensure that one broken LED does not affect the others.Every LED is controlled by 3 wires (power, ground & data) and can be connected via these wires to the next LED, creating a big string of LED's. You can solder these LED's in electric circuits, or sew them into clothing, onto backpacks, onto shoes etc.
Velleman
5-7 Days
VMW108
Weight: kg

Velleman BrightDot Medium Circle LED

It's time to get creative with LED's thanks to the BrightDot wearable collection!BrightDots are small and wearable modules with one or more LED's that need to be controlled by an Arduino compatible development board.The entire collection includes a series of diverse modules with addressable RGB LED's that can be controlled individually. We also developed a unique Arduino compatible VMW101: ESP32 Wearable Development Board that you can use to create something bright & wearable that's also smart.This set includes a medium Brightdot circle. Each PCB is super thin and includes gold plated contacts with 6 sewing holes of 1.22mm. Also, all models have backup lines to ensure that one broken LED does not affect the others.Every LED is controlled by 3 wires (power, ground & data) and can be connected via these wires to the next LED, creating a big string of LED's. You can solder these LED's in electric circuits, or sew them into clothing, onto backpacks, onto shoes etc.
Velleman
5-7 Days
VMW109
Weight: kg

Velleman BrightDot Large Circle LED

It's time to get creative with LED's thanks to the BrightDot wearable collection!BrightDots are small and wearable modules with one or more LED's that need to be controlled by an Arduino compatible development board.The entire collection includes a series of diverse modules with addressable RGB LED's that can be controlled individually. We also developed a unique Arduino compatible VMW101: ESP32 Wearable Development Board that you can use to create something bright & wearable that's also smart.This set includes a large Brightdot circle. Each PCB is super thin and includes gold plated contacts with 6 sewing holes of 1.22mm. Also, all models have backup lines to ensure that one broken LED does not affect the others.Every LED is controlled by 3 wires (power, ground & data) and can be connected via these wires to the next LED, creating a big string of LED's. You can solder these LED's in electric circuits, or sew them into clothing, onto backpacks, onto shoes etc.