This Velleman Arduino Shield can Control 3 dimmer channels (1 x RGB or 3 single channels) with Arduino™ UNO. Downloadable example sketch, stackable design: the shield can be stacked with other shields. Requires 1 Arduino™ UNO (not included)

Velleman Arduino Power shield that can drive: relays, solenoids, DC and stepper motors. 2 channels, choose between an external or internal (Vin) power supply. Based on the dual full bridge driver L298P. Downloadable sample sketch. Stackable design: the shield can be stacked with other shields. Requires 1 Arduino™ UNO (not included).

With this Velleman Arduino Shield you can configure your Arduino™ as a simple web server or let it get data from the worldwide web. Based on a Microchip ENC28J60 chip. Downloadable sample sketches and library. Stackable design: the shield can be stacked with other shields. Requires 1 Arduino™ UNO (not included).

The Velleman Arduino Shield which is a general purpose INPUT - OUTPUT shield for Arduino™. 6 relay outputs, 6 analogue inputs, 6 digital inputs. Downloadable sample sketch. Stackable design: the shield can be stacked with other shields. Requires 1 Arduino™ UNO (not included).

The VMA11 is a radio and RDS receiver combined with a powerful and efficient 2.8 W class D audio amplifier. All of this is designed in the familiar Arduino formfactor. In short, this module is ideal if you want to create your own clock radio or if you want to add FM functionality to your projects! Worldwide FM support, RDS/RBDS support, volume control, automatic frequency control, automatic gain control, Arduino® library available.

With this Velleman Arduino Shield Kit you can control 3 dimmer channels (1 x RGB or 3 single channels) with Arduino™ UNO. Downloadable example sketch, stackable design: the shield can be stacked with other shields. Requires 1 Arduino™ UNO (not included)

The Velleman Arduino Shield kit for the UNO. General purpose INPUT - OUTPUT shield for Arduino™. 6 relay outputs, 6 analog inputs, 6 digital inputs. Downloadable sample sketch. Stackable design: the shield can be stacked with other shields. Requires 1 Arduino™ UNO (not included).

This power module is an extension board for micro:bit®. It is powered by two CR2025 or CR2032 batteries. An additional buzzer can be used as output connection for the micro:bit.

This motor shield is compatible with micro:bit® and can be used to drive 2 DC motors at the same time. On top of that, you don't lose your micro:bit®'s 14 channel I/O ports because this little motor shield extends them. The motor driving chip is a TB6612 and drives a maximum of 1.2 A current.