Build your 3D LED cube and created unlimited 3D effects. The unit comes standard loaded with effects. Connect to your computer (USB) and create your own! (free software download) Also available with White LEDs

Build your 3D LED cube and created unlimited 3D effects. The unit comes standard loaded with effects. Connect to your computer (USB) and create your own! (free software download) Also available with Blue LEDs

The running light module is the perfect addition to your existing system if you are looking to create the kind of effects used in a disco. The speed of this module can be adjusted manually. All the outputs are equipped with a LED indication.

This kit allows you to control a lamp or group of lamps through a DMX signal. The DMX protocol was developed by USITT in 1986 with the purpose of controlling dimmers, scanners, moving heads and other lighting devices with simple wiring. It is mainly being used in theatres and discos, but you can use it in any place where a central or automated lighting is needed. Use our "USB controlled DMX interface" K8062 (kit version), VM116 (built version) or any other control console compliant with the DMX-512 protocol as a controller

This kit has ten 12V/400mA outputs to control cold-cathode fluorescent lamps, light bulbs, LED's or "solid state" relays. It is intended for use with advertisement lighting, party lights, eye-catching displays in a disco.

Power up to four 1W or two 3W high-power LED's. Delivers accurate constant current required by most high-power LEDs, high efficiency due to switch mode principle, built-in rectifier for easy connection to AC source. Compact size, short-circuit protected, no heatsink required. Also suited as fixed current NiCd/NiMH battery charge circuit. For home, disco, stage, education, architectural lighting, science projects.

This Kit has been designed to control LED's for display advertising and light effects, also suitable for incandescent lamps. The three outputs drive high power Mosfet's which can each sink about 3A. Many sequences can be selected with varying speeds and fade times.

Customise your Vertex K8400 3D Printer with this RGB LED Illumination kit. Select the colour via the Vertex Menu or G-Code commands, even change the colour when printing ends etc. Supplied as a complete set of parts including driver board, LED strips, cables & mounting clips - requires soldering.

Thee Whadda WSL8072 Kit allows you to control a relay by means of the well-known DMX512 protocol. This protocol was developed by USITT in 1986 to control dimmers, scanners, moving-head spots and other lighting devices with a simple wiring. In some cases, a simple ON/OFF selection is desired. This is where this K8072 comes in. It is actually a bus-controlled power driver. The relay will be activated when the DMX value of the set channel equals 140 or more and turns off when the value is 120 or less. Together with our K8062/VM116, a computer-controlled automation will be very easy to build.