Velleman Kits & Projects

This module is based on VM146 has been designed to control LED's for display advertising and light effects. The three outputs drive high power Mosfet's which can each sink about 3A. Many sequences can be selected with varying speeds and fade times.

This module is designed to control LED's for display advertising and light effects. The three outputs drive high power Mosfet's which can each sink about 3A. Many colours and dimming combinations can be selected. Remote control handset must be order separately VM118R

This module can be used with VM146, VM150, VM151, VM152, VM161, VM162 and VM168 to increase their output. Also allowing for easier distribution and wiring of LED strips. The three outputs drive high power Mosfet's which can each sink about 4A. This module will mimic the function of the Velleman module you have connected.

This module has been designed to control any 12 or 24V LED strips or low voltage incandescent lamps for display advertising and light effects. The output drives high power Mosfet which can each sink about 5A. Built in microphone with sensitivity control

VM192RF is a radio remote controlled RGB driver for 12 or 24VDC led strips. It allows you to set a colour manually or loop through all colours automatically, with 4 selectable fading speeds. A built-in dimmer allows the user to adjust the intensity, regardless of the chosen colour or mode. Includes one 4 channel RF remote, up to 5 remotes can be linked. Multiple controllers in a single room is possible. Colour, intensity and mode are retained and will be restored after a power failure. Speed determined by jumper setting. Can also be used as a single channel led dimmer. Smooth manual scrolling through red-orange-yellow-green-blue-indigo-violet with up/down buttons. Fix a manually selected colour.

Suitable for use with our K8200 3D printer kit, this pre-assembled unit will illuminate your 3D object while being printed.