Velleman Kits & Projects

This blinking module was designed for the activation and deactivation of a load (e.g. lighting) in order to obtain a blinking effect. The ON and the OFF duration can be adjusted separately. The blinking module is suited for both resistive and slightly inductive loads. This blinking module is ideally suited for steering e.g. disco lights, safety signs, light bulbs, ferromagnetic transformers for halogen lighting, etc.

This module will certainly come in handy if, when activating one device (or a light or a series of lights), you wish to activate a second device.

Digitally cleans the video signal / removes unwanted distortion in video signal. Stabilises picture quality and luminance fluctuations' Improves picture quality on LCD monitors or projectors

Ideal for counting people or parts, for keeping scores, etc... The HOURS:MIN and the MIN:SEC functions are also very practical (displays 23:59 & 59:59). A built-in oscillator makes it possible to time intervals without making use of an external oscillator (clock function). Counting impulses (addition & subtraction) can be given both through push buttons and the counting inputs. A memory function constantly compares the current value with a preset value and activates an output for as long as both are equal.

2-Channel RF Remote Control Transmitter Module

The VM110 interface board has 5 digital input channels and 8 digital output channels. In addition, there are two analogue inputs and two analogue outputs with 8 bit resolution. The number of inputs/outputs can be further expanded by connecting more (up to a maximum of four) cards to the PC's USB connectors. All communication routines are contained in a Dynamic Link Library (DLL). You may write custom Windows (98SE, 2000, Me, XP) applications in Delphi, Visual Basic, C++ Builder or any other 32-bit Windows application development tool that supports calls to a DLL

Suitable for programming Microchip® FLASH PIC™ microcontrollers. Supports 4 different 300 mil. PICs: 8p, 14p, 18p and 28p

This small amplifier is constructed with the TDA2616 IC, with a maximum supply capability of 2 x 15Wrms (4 ohm) of 2 x 10Wrms (8 ohm). The IC is protected against overheating and short circuits. Additional rectifier and smoothing filter are unnecessary because alternating current can be connected directly with the unit.

8-Channel RF Remote Control Set Module.

Replacement 8-Channel RF Remote Transmitter Module.