Velleman
K8601

Velleman E3D Compatible Hotend Assembly Kit K8601

  • 5-7 Days
  • Description
  • More Details
A fully E3D compatible (all E3D nozzles fit this assembly) 3D print head hotend. Suitable for use to modify your own 3D printer and also a replacement for the Velleman K8600 Hotend. This set includes a 1.75 mm filament nozzle that is fully E3D compatible (all E3D nozzles fit this assembly). It can print PLA or ABS as well as other materials that melt at a maximum temperature of 300°C (*) and at a recommended layer resolution of 0.1 - 0.2 mm. *max temp for the K8600 is 240°C.
  • print technology: Fused Filament Fabrication (FFF)
  • layer resolution: 0.1 mm - 0.2 mm (maximum: 0.35 mm - minimum: 0.05 mm)
  • filament diameter: 1.75 mm
  • prints: PLA, ABS and other materials printable at a max. 300°C
  • maximum nozzle operating temperature: 300 °C
    • If used with the Vertex Nano (K8600), the maximum nozzle operating temperature is 240 °C
  • compatibility: view all open source files to check your 3D printer's compatibility
  • open source

Kit Includes

  • heater wire loom with heat sensor
  • spiral wrap, diameter 5 mm, length 50 cm
  • PTFE bowden tube 4 x 2 x 500 mm
  • nozzle 0.35 mm
  • heatbreak
  • hotend heater block
  • hotend heatsink
  • bowden coupler extruder
  • bowden coupler hotend
  • heatsink fixation clip
  • fan (30 x 30 x 10 mm - 80 cm cable)
  • 2 x fan strap
  • 5 x zip ties
  • silicone compound 1.5 g
  • 4 x parker screw 3.5 x 9.5 mm
  • 1 x screw M2.5 x 4
  • 1 x screw M3 x 12
  • 1 x washer M3 3 x 8

__ifPurchasable__
__endifPurchasable__