5-7 Days
Weight: kg

Velleman Electronic Watch Kit K1200


Isn't it about time you made your own electronic watch!?

Make a statement with this neat looking DIY, Arduino compatible watch that fits everyone's wrist. The most difficult SMD components are pre-soldered but the rest of the soldering fun is up to you.

The watch is Arduino based and pre-programmed with an addictive reflex game and of course with a basic time view. These functions are triggered by pressing the single multipurpose button and is displayed by using the 24 amber coloured LEDs. Then again, you can easily re-program it to your liking by using the custom cradle (K1201) or a USB to UART module.
Don't worry about the programming difficulty because you can base your own code on the open-source Arduino library. So feel free to experiment with different time views or invent your own game!

The watch comes with a stylish black fabric woven wrist band and closes by means of a silver coloured buckle. Also, the watch only has a diameter of 35 mm and a height of 9.6 mm so it's ideal for both large and small wrists!

If you do not become overly addicted to the reflex game, the battery should last around 2 years. But remember, time flies when you're having fun!

Supplied pre-programmed but requires K1201 for custom programming.

5-7 Days
Weight: kg

Velleman Watch programming cradle K1201


This USB-to-serial converter was designed to reprogram the Arduino compatible K1200 Watch Kit. Whilst the watch kit K1200 does come pre-programmed, this interface allows you to reprogram your watch or built-in game.
1-5 Days
Weight: kg

Whadda Big Digital Clock, Temp Display Kit WST8089

Alternative to Velleman K8089

The WST8089 Digital Clock kit can also display temperature (Centigrade or Fahrenheit) with the use of kit  K8067 which has to be purchased separately. The words Open/Closed can also be displayed if desired.
Dimensions: 230 x 74 x 32mm
Power Supply: 12Vac / 250mA
1-5 Days
Weight: kg

Whadda Multifunctional Up/Down Counter Kit WST8035

Replaces Velleman K8035

Very practical for counting people or parts, scorekeeping, ... Counts up or down, count input through on-board push buttons or by external pulses. Display modes: normal or time (hh:mm and mm:ss) An internal oscillator allows time measurement, a memory function constantly compares the current value with a preset value and activates an output for as long as both are equal. Self diagnostic at power up. Comes with easy board-to-wire connector (20cm wire).

Dimensions: 125 x 75mm (PCB)
Power Supply: 9-12Vdc or 2 x 9Vac / 150Ma